PocketPixel · Pre-order open
Tiny console.
Big nostalgia.
A pocket-sized handheld that lives on your keys. A monochrome OLED display, three tactile buttons, and vibration-motor haptics — in a translucent shell printed in our studio, with your name on the back.
The prototype is built. Pre-orders help fund the first production batch — and they are the only way to get these colours.
Atomic Purple — The one every 90s handheld wanted to be.Pre-order only — not sold again after this batch.
Printed on the back of the shell, included in the pre-order price. Leave it blank for a clean back.
Product renders based on our prototype — shell colours, surface finish and screen graphics are illustrative. The name shows where it is printed.
- Processor
- ESP32-C3
- Battery
- 450 mAh
- Display
- Monochrome OLED display
- Charging
- USB-C*
- Feedback
- Vibration-motor haptics
- Carry
- Integrated keychain loop
* Use a USB-A to USB-C cable for charging. USB-C to USB-C charging is not supported.
How the pre-order works
You're funding a batch, not buying from a shelf
The prototype is built; the production batch isn't. Here's exactly what your money does and what you get for going first.
01
You pay ₹1,599 today
₹400 under the ₹1999 launch price, with your name printed on the back and your pick of shell — including four colours that won't be sold again after this.
02
That money buys components
Boards, OLED panels and cells are only worth ordering in volume. Pre-orders are what let us place that order — which is why the price is lower and why the batch is capped at 300 units.
03
We print, finish and ship
Shipping starts early December 2026, in reservation order. You'll hear from us when your unit goes into production, and again when it's dispatched.
Portability
Sized to play
Compact enough to carry with your keys. Three physical buttons keep the controls simple and within reach of your thumb.
- Held, not gripped. The three keys sit under one thumb — no second hand needed.
- Rides on your keys. The loop is moulded into the shell, so there’s nothing to snap off.
Product render. Hand and key comparisons illustrate portability, not exact measurements.
What's inside
Every part earns its place
A small shell leaves no room for anything decorative. What's here is here because it had to be.
Three buttons. One hand.
Three tactile triangular buttons give your thumb a simple, physical control layout.
Feel the gameplay
A vibration motor provides haptic feedback during gameplay. PocketPixel has no built-in speaker or audio output.
Monochrome OLED display
A clear monochrome OLED display brings the pixel graphics into focus against a dark background.
Made to carry
The keychain loop is integrated into the shell, so PocketPixel can travel with your everyday keys.
USB-C charging
Recharge through the USB-C port using a USB-A to USB-C cable. USB-C to USB-C charging is not supported.
Printed in our studio
A 3D-printed shell, finished in the VeeGifts studio and personalized with your name on the back.
Six shells
Six colours. Your pick.
Choose Atomic Purple, Ice Blue, Clear Frost, Ember Orange, Acid Green or Smoke. Four of the six are printed for this batch only and won't be sold again.
Colour renders are illustrative. Printed texture, translucency and finish may vary.
How it got here
From prototype to PocketPixel
The compact shell brings the display, three-button controls, and keychain loop into one small handheld. The design study shows the layout of the photographed prototype.
Printed and hand-finished on the same bench as our lamps and vases. The shell is the part we know best — which is why yours can carry your name without a tooling change.
A concept illustration based on the prototype, not an original working sketch.
Back the first batch
You’re pre-ordering a unit from a batch that hasn’t been made yet. Your money buys the components, your name goes on the back, and shipping starts early December 2026.
1 of 300 units backed
299 left in this batch
Pre-order price, charged in full today. Name printing included.
Atomic Purple — The one every 90s handheld wanted to be.Pre-order only — not sold again after this batch.
Printed on the back of the shell, included in the pre-order price. Leave it blank for a clean back.
- Shell
- Atomic Purple
- Printed on the back
- Nothing
- Ships from
- early December 2026
- Due today
- ₹1,599
Next: address and payment, on our normal secure checkout.
Before you back it
- You are pre-ordering a production unit. The prototype is built; the production batch is not. The teal photographs are of that prototype; the coloured shells are renders based on it, and finish and details may vary.
- Shipping is planned to start early December 2026. Hardware slips. If the date moves, you'll hear it from us by email before you hear it anywhere else.
- If the batch never runs, you get your money back in full less the payment-gateway fee (roughly 2%, which the gateway keeps and we never receive).
- Once your unit enters production your personalization is locked, and a printed name can't be resold — so a change of mind after that point can't be refunded. We'll email you before that happens.
Specifications
What's inside
Three buttons, one screen, no speaker.
- Display
- Monochrome OLED display
- Controls
- Three tactile triangular buttons
- Feedback
- Vibration-motor haptics during gameplay
- Audio
- None — no built-in speaker or audio output
- Processor
- ESP32-C3
- Battery
- 450 mAh, rechargeable
- Charging
- USB-C port — use a USB-A to USB-C cable; USB-C to USB-C is not supported
- Shell
- Translucent 3D-printed shell, finished in our studio — six colours
- Personalisation
- Your name on the back, up to 12 characters
- Carry
- Integrated keychain loop
- Ships
- Pre-order — shipping starts early December 2026
Questions
Straight answers
Including the one about whether these are photographs.